Config(配置)#

This chapter will describe the config section of the composer.json schema.

process-timeout#

The timeout in seconds for process executions, defaults to 300 (5mins). The duration processes like git clones can run before Composer assumes they died out. You may need to make this higher if you have a slow connection or huge vendors.

To disable the process timeout on a custom command under scripts, a static helper is available:

{
    "scripts": {
        "test": [
            "Composer\\Config::disableProcessTimeout",
            "phpunit"
        ]
    }
}

allow-plugins#

Defaults to {} which does not allow any plugins to be loaded.

As of Composer 2.2.0, the allow-plugins option adds a layer of security allowing you to restrict which Composer plugins are able to execute code during a Composer run.

When a new plugin is first activated, which is not yet listed in the config option, Composer will print a warning. If you run Composer interactively it will prompt you to decide if you want to execute the plugin or not.

Use this setting to allow only packages you trust to execute code. Set it to an object with package name patterns as keys. The values are true to allow and false to disallow while suppressing further warnings and prompts.

{
    "config": {
        "allow-plugins": {
            "third-party/required-plugin": true,
            "my-organization/*": true,
            "unnecessary/plugin": false
        }
    }
}

You can also set the config option itself to false to disallow all plugins, or true to allow all plugins to run (NOT recommended). For example:

{
    "config": {
        "allow-plugins": false
    }
}

use-include-path#

Defaults to false. If true, the Composer autoloader will also look for classes in the PHP include path.

preferred-install#

Defaults to dist and can be any of source, dist or auto. This option allows you to set the install method Composer will prefer to use. Can optionally be an object with package name patterns for keys for more granular install preferences.

{
    "config": {
        "preferred-install": {
            "my-organization/stable-package": "dist",
            "my-organization/*": "source",
            "partner-organization/*": "auto",
            "*": "dist"
        }
    }
}
  • source means Composer will install packages from their source if there is one. This is typically a git clone or equivalent checkout of the version control system the package uses. This is useful if you want to make a bugfix to a project and get a local git clone of the dependency directly.
  • auto is the legacy behavior where Composer uses source automatically for dev versions, and dist otherwise.
  • dist (the default as of Composer 2.1) means Composer installs from dist, where possible. This is typically a zip file download, which is faster than cloning the entire repository.

Note: Order matters. More specific patterns should be earlier than more relaxed patterns. When mixing the string notation with the hash configuration in global and package configurations the string notation is translated to a * package pattern.

use-parent-dir#

When running Composer in a directory where there is no composer.json, if there is one present in a directory above Composer will by default ask you whether you want to use that directory's composer.json instead.

If you always want to answer yes to this prompt, you can set this config value to true. To never be prompted, set it to false. The default is "prompt".

Note: This config must be set in your global user-wide config for it to work. Use for example php composer.phar config --global use-parent-dir true to set it.

store-auths#

What to do after prompting for authentication, one of: true (always store), false (do not store) and "prompt" (ask every time), defaults to "prompt".

github-protocols#

Defaults to ["https", "ssh", "git"]. A list of protocols to use when cloning from github.com, in priority order. By default git is present but only if secure-http is disabled, as the git protocol is not encrypted. If you want your origin remote push URLs to be using https and not ssh (git@github.com:...), then set the protocol list to be only ["https"] and Composer will stop overwriting the push URL to an ssh URL.

github-oauth#

A list of domain names and oauth keys. For example using {"github.com": "oauthtoken"} as the value of this option will use oauthtoken to access private repositories on github and to circumvent the low IP-based rate limiting of their API. Composer may prompt for credentials when needed, but these can also be manually set. Read more on how to get an OAuth token for GitHub and cli syntax here.

gitlab-domains#

Defaults to ["gitlab.com"]. A list of domains of GitLab servers. This is used if you use the gitlab repository type.

gitlab-oauth#

A list of domain names and oauth keys. For example using {"gitlab.com": "oauthtoken"} as the value of this option will use oauthtoken to access private repositories on gitlab. Please note: If the package is not hosted at gitlab.com the domain names must be also specified with the gitlab-domains option. Further info can also be found here

gitlab-token#

A list of domain names and private tokens. Private token can be either simple string, or array with username and token. For example using {"gitlab.com": "privatetoken"} as the value of this option will use privatetoken to access private repositories on gitlab. Using {"gitlab.com": {"username": "gitlabuser", "token": "privatetoken"}} will use both username and token for gitlab deploy token functionality (https://docs.gitlab.com/ee/user/project/deploy_tokens/) Please note: If the package is not hosted at gitlab.com the domain names must be also specified with the gitlab-domains option. The token must have api or read_api scope. Further info can also be found here

gitlab-protocol#

A protocol to force use of when creating a repository URL for the source value of the package metadata. One of git or http. (https is treated as a synonym for http.) Helpful when working with projects referencing private repositories which will later be cloned in GitLab CI jobs with a GitLab CI_JOB_TOKEN using HTTP basic auth. By default, Composer will generate a git-over-SSH URL for private repositories and HTTP(S) only for public.

disable-tls#

Defaults to false. If set to true all HTTPS URLs will be tried with HTTP instead and no network level encryption is performed. Enabling this is a security risk and is NOT recommended. The better way is to enable the php_openssl extension in php.ini. Enabling this will implicitly disable the secure-http option.

secure-http#

Defaults to true. If set to true only HTTPS URLs are allowed to be downloaded via Composer. If you really absolutely need HTTP access to something then you can disable it, but using Let's Encrypt to get a free SSL certificate is generally a better alternative.

bitbucket-oauth#

A list of domain names and consumers. For example using {"bitbucket.org": {"consumer-key": "myKey", "consumer-secret": "mySecret"}}. Read more here.

cafile#

Location of Certificate Authority file on local filesystem. In PHP 5.6+ you should rather set this via openssl.cafile in php.ini, although PHP 5.6+ should be able to detect your system CA file automatically.

capath#

If cafile is not specified or if the certificate is not found there, the directory pointed to by capath is searched for a suitable certificate. capath must be a correctly hashed certificate directory.

http-basic#

A list of domain names and username/passwords to authenticate against them. For example using {"example.org": {"username": "alice", "password": "foo"}} as the value of this option will let Composer authenticate against example.org. More info can be found here.

bearer#

A list of domain names and tokens to authenticate against them. For example using {"example.org": "foo"} as the value of this option will let Composer authenticate against example.org using an Authorization: Bearer foo header.

platform#

Lets you fake platform packages (PHP and extensions) so that you can emulate a production env or define your target platform in the config. Example: {"php": "7.0.3", "ext-something": "4.0.3"}.

This will make sure that no package requiring more than PHP 7.0.3 can be installed regardless of the actual PHP version you run locally. However it also means the dependencies are not checked correctly anymore, if you run PHP 5.6 it will install fine as it assumes 7.0.3, but then it will fail at runtime. This also means if {"php":"7.4"} is specified; no packages will be used that define 7.4.1 as minimum.

Therefore if you use this it is recommended, and safer, to also run the check-platform-reqs command as part of your deployment strategy.

If a dependency requires some extension that you do not have installed locally you may ignore it instead by passing --ignore-platform-req=ext-foo to update, install or require. In the long run though you should install required extensions as if you ignore one now and a new package you add a month later also requires it, you may introduce issues in production unknowingly.

If you have an extension installed locally but not on production, you may want to artificially hide it from Composer using {"ext-foo": false}.

vendor-dir#

Defaults to vendor. You can install dependencies into a different directory if you want to. $HOME and ~ will be replaced by your home directory's path in vendor-dir and all *-dir options below.

bin-dir#

Defaults to vendor/bin. If a project includes binaries, they will be symlinked into this directory.

data-dir#

Defaults to C:\Users\<user>\AppData\Roaming\Composer on Windows, $XDG_DATA_HOME/composer on unix systems that follow the XDG Base Directory Specifications, and $COMPOSER_HOME on other unix systems. Right now it is only used for storing past composer.phar files to be able to roll back to older versions. See also COMPOSER_HOME.

cache-dir#

Defaults to C:\Users\<user>\AppData\Local\Composer on Windows, /Users/<user>/Library/Caches/composer on macOS, $XDG_CACHE_HOME/composer on unix systems that follow the XDG Base Directory Specifications, and $COMPOSER_HOME/cache on other unix systems. Stores all the caches used by Composer. See also COMPOSER_HOME.

cache-files-dir#

Defaults to $cache-dir/files. Stores the zip archives of packages.

cache-repo-dir#

Defaults to $cache-dir/repo. Stores repository metadata for the composer type and the VCS repos of type svn, fossil, github and bitbucket.

cache-vcs-dir#

Defaults to $cache-dir/vcs. Stores VCS clones for loading VCS repository metadata for the git/hg types and to speed up installs.

cache-files-ttl#

Defaults to 15552000 (6 months). Composer caches all dist (zip, tar, ...) packages that it downloads. Those are purged after six months of being unused by default. This option allows you to tweak this duration (in seconds) or disable it completely by setting it to 0.

cache-files-maxsize#

Defaults to 300MiB. Composer caches all dist (zip, tar, ...) packages that it downloads. When the garbage collection is periodically ran, this is the maximum size the cache will be able to use. Older (less used) files will be removed first until the cache fits.

cache-read-only#

Defaults to false. Whether to use the Composer cache in read-only mode.

bin-compat#

Defaults to auto. Determines the compatibility of the binaries to be installed. If it is auto then Composer only installs .bat proxy files when on Windows or WSL. If set to full then both .bat files for Windows and scripts for Unix-based operating systems will be installed for each binary. This is mainly useful if you run Composer inside a linux VM but still want the .bat proxies available for use in the Windows host OS. If set to proxy Composer will only create bash/Unix-style proxy files and no .bat files even on Windows/WSL.

prepend-autoloader#

Defaults to true. If false, the Composer autoloader will not be prepended to existing autoloaders. This is sometimes required to fix interoperability issues with other autoloaders.

autoloader-suffix#

Defaults to null. Non-empty string to be used as a suffix for the generated Composer autoloader. When null a random one will be generated.

optimize-autoloader#

Defaults to false. If true, always optimize when dumping the autoloader.

sort-packages#

Defaults to false. If true, the require command keeps packages sorted by name in composer.json when adding a new package.

classmap-authoritative#

Defaults to false. If true, the Composer autoloader will only load classes from the classmap. Implies optimize-autoloader.

apcu-autoloader#

Defaults to false. If true, the Composer autoloader will check for APCu and use it to cache found/not-found classes when the extension is enabled.

github-domains#

Defaults to ["github.com"]. A list of domains to use in github mode. This is used for GitHub Enterprise setups.

github-expose-hostname#

Defaults to true. If false, the OAuth tokens created to access the github API will have a date instead of the machine hostname.

use-github-api#

Defaults to true. Similar to the no-api key on a specific repository, setting use-github-api to false will define the global behavior for all GitHub repositories to clone the repository as it would with any other git repository instead of using the GitHub API. But unlike using the git driver directly, Composer will still attempt to use GitHub's zip files.

notify-on-install#

Defaults to true. Composer allows repositories to define a notification URL, so that they get notified whenever a package from that repository is installed. This option allows you to disable that behavior.

discard-changes#

Defaults to false and can be any of true, false or "stash". This option allows you to set the default style of handling dirty updates when in non-interactive mode. true will always discard changes in vendors, while "stash" will try to stash and reapply. Use this for CI servers or deploy scripts if you tend to have modified vendors.

archive-format#

Defaults to tar. Overrides the default format used by the archive command.

archive-dir#

Defaults to .. Default destination for archives created by the archive command.

Example:

{
    "config": {
        "archive-dir": "/home/user/.composer/repo"
    }
}

htaccess-protect#

Defaults to true. If set to false, Composer will not create .htaccess files in the Composer home, cache, and data directories.

lock#

Defaults to true. If set to false, Composer will not create a composer.lock file and will ignore it if one is present.

platform-check#

Defaults to php-only which only checks the PHP version. Set to true to also check the presence of extension. If set to false, Composer will not create and require a platform_check.php file as part of the autoloader bootstrap.

secure-svn-domains#

Defaults to []. Lists domains which should be trusted/marked as using a secure Subversion/SVN transport. By default svn:// protocol is seen as insecure and will throw, but you can set this config option to ["example.org"] to allow using svn URLs on that hostname. This is a better/safer alternative to disabling secure-http altogether.

Repositories | Runtime